Showing posts with label RO water. Show all posts
Showing posts with label RO water. Show all posts

Wednesday, 29 June 2016

How does a Focus Chemical Metering Pump Work Process for Water Treatment Equipments?

The Focus diaphragm type chemical dosing systems are positive displacement chemical pumps that allow the operator to adjust the displacement of the pump which changes the output rate. Focus pumps are lost motion type pumps which use a piston to mechanically move a rubber diaphragm that is the barrier separating the liquid from the inner workings of the pump. 

Chemical Dosing Systems for RO Water
Chemical Dosing Pump Systems for RO Water
An electric motor drives a worm gear speed reducer that in turn turns a shaft with an eccentric installed on the shaft. As the eccentric moves forward the piston is pushed forward, along with the diaphragm, and the liquid that is in the wetted end of the pump is pushed out through the discharge check valve and into the piping going to the industrial process. As the eccentric continues to rotate through a 360 degree cycle it will eventually push the piston rod rearward, which pulls the diaphragm rearward. That rearward action creates a vacuum in the wetted end of the pump resulting in the chemical liquid being sucked into the wetted end through the suction side check valve. Focus Engineerrs are leading metering and dosing pump manufacturer in india.


Many people choose to filter or test the drinking water that comes out of their tap or from their private well for a variety of reasons. And whether at home, at work or while traveling.

Lead can enter drinking water when service pipes that contain lead corrode, especially where the water has high acidity or low mineral content that corrodes pipes and fixtures. The most common problem is with brass or chrome-plated brass faucets and fixtures with lead solder, from which significant amounts of lead can enter into the water, especially hot water.

Homes built before 1986 are more likely to have lead pipes, fixtures and solder. The Safe Drinking Water Act (SDWA) has reduced the maximum allowable lead content -- that is, content that is considered "lead-free" -- to be a weighted average of 0.25 percent calculated across the wetted surfaces of pipes, pipe fittings, plumbing fittings, and fixtures and 0.2 percent for solder and flux.

Corrosion is a dissolving or wearing away of metal caused by a chemical reaction between water and your plumbing. A number of factors are involved in the extent to which lead enters the water, including:

the chemistry of the water (acidity and alkalinity) and the types and amounts of minerals in the water,
the amount of lead it comes into contact with,
the temperature of the water,
the amount of wear in the pipes,
how long the water stays in pipes and
the presence of protective scales or coatings inside the plumbing materials.

Is there a safe level of lead in drinking water? 

The Safe Drinking Water Act requires EPA to determine the level of contaminants in drinking water at which no adverse health effects are likely to occur with an adequate margin of safety. These non-enforceable health goals, based solely on possible health risks, are called maximum contaminant level goals (MCLGs). EPA has set the maximum contaminant level goal for lead in drinking water at zero because lead is a toxic metal that can be harmful to human health even at low exposure levels. Lead is persistent, and it can bio-accumulate in the body over time.

Water Treatment Equipments for Home
Water Treatment Equipments for Home
Young children, infants, and fetuses are particularly vulnerable to lead because the physical and behavioral effects of lead occur at lower exposure levels in children than in adults. A dose of lead that would have little effect on an adult can have a significant effect on a child. In children, low levels of exposure have been linked to damage to the central and peripheral nervous system, learning disabilities, shorter stature, impaired hearing, and impaired formation and function of blood cells.

Find out more about Drinking Water Treatment Equipments System for Home.

Thursday, 23 June 2016

How to Learn about RO Water Treatment Equipment System for Home Purpose?

When talking to a friend about the drinking water, he said, "We do not have that problem at home, because we filter the water (aqua gaurd filter) that we use". Here we are learn about how to get ro water from water treatment equipments system for home & industry.

To him, but he did not buy a water filter for water will receive an annual cash payments. The money of the United States, Europe, research institutions, such as the filter goes. Whatever the case that if you laugh. they marakkariyaip (our town istiri carriages used in the box) designs using the filters on that.

Water Treatment Equipments for RO Water
Water Treatment Equipments for RO Water

In third world countries, they cut down the trees and destroying their livelihood, which is taken from the vegetables in the water. but somehow it stung a little of the toxic chemicals in order to use a seasoning. Check that you, the new filter turbid water from the black color comes first.

RO Water Purification & Filtration by Chemical Dosing System :

You can set up a filter in your home and spending a penny. 100% pure, no side effect. Also, if you are out of the country within which science payanpatuttinirkal filter for your children and your children will be gone .. but this time they will learn from science to you. Tell to your offspring.

Your children are encouraged to think much of this kind of small things.

Retrieve managing alien. It was a waste of your electricity bill. Someone's livelihood destroyed sin and culpability yourself. 20-liter bottle of water at the rate of two a week, using a total of 8 months per year, you can save up to $ 3000 -4000.

It is time to act on the internet site.

Rocks - foil pebbles or small stones.
coarse Sand - caral sand. (When you sift sand mincuratu)
charcoal - erikkappatta timber (70% to 90% erincatu).
fine sand - flower in the sand, well calikkappatta sand.
cotton cloth: cloth placed between each of the layers will be all right. It has not shown in this picture.
Cut the root - use a layer (Optional).

The largest vessel to your requirements (such as old water bottles and 20 liter water can) you can use. If possible, utilize manpanaiyai embedded in the base of the tube. During the tour, a visit to the water, you can use this.
How mere gray (charcoal) You say that you do not put the tooth brush "paste" And we are giving you paste "charcoal" Do not be deceived by the emarriyavaru us to hear that.

Focus Engineerrs are premier water treatment equipments manufacturer in porur, chennai. It's an one of the leading metering and dosing pump manufacturer in chennai, india.

Saturday, 18 June 2016

Which is Best Drinking Water Treatment Equipments System?

There are about 2500 drinking water treatment equipments system of one sort or another on the market in india for home use. Some are as simple as filters you place on top of a pitcher, and pour water through. Some are as complicated as whole-house systems coupled with a water-softening system, which cost thousands of dollars.

A good salesman can make his product look like the clear choice that only an idiot would turn down for a different product, and it's no different with drinking water treatment systems. There is hype on all sides. By the end of this article, you'll know what you need to know about home water purification systems.

Water Treatment Equipments Manufacturer
Water Treatment Equipments Manufacturer India

Types of Drinking Water Treatment Equipments System:

There are two types of systems widely sold in India:

1. RO Water : 

Reverse Osmosis (RO) A reverse osmosis system forces water through a membrane, which is essentially a filter, which has pores so small that the water molecules can just barely get through. Anything larger than a water molecule, like many dissolved solids, heavy metals like lead, and many chemicals, can't get through. water treatment equipments for ro water purification in home & industry esctors.

2. SBAC Water :

Activated Carbon or "Solid Block Activated Carbon" (SBAC) An SBAC unit filters out contaminants via two processes-physical removal, where contaminants get stuck in the nooks and crannies and pores of a block of carbon, and adsorption, where contaminants are attracted and held to the surface of the carbon particles. chemical dosing system for sbac water filer.

RO Water Treatment Equipment Advantages :

1. Significantly reduces salt and most other inorganic material, and some organic compounds.
2. Parasites and viruses are usually removed by a properly-functioning unit.
3. When coupled with a high-quality activated carbon filter to capture the volatile organic compounds (VOCs) that get through the reverse osmosis process, the treated water is essentially free of contaminants.

RO Water Treatment Equipments Disadvantage: 

1. Point-of-use units at each faucet can make just a few gallons a day, so they require a storage tank, which takes up room, and requires maintenance.
2. Reverse osmosis wastes three to ten gallons of water for every gallon of treated water produced.
3. More maintenance is required to change filters and membranes and to clean the storage tank.
4. The efficiency of the membrane can degrade due to attack by some contaminants, and the slightest tear or other damage, which is hard to detect, can allow untreated water to flow through the system.
5. Because of their complexity, they are typically more expensive to install and to operate. Compared with the leading activated charcoal unit, they're usually about 2 ½ to 3 ½ times as expensive to operate.

Water Treatment Equipments for RO Water
Water Treatment Equipments for RO Water 

SBACD Water Treatment Equipments Advantage:

1. Provide a very small pore size and a huge surface area to attract and trap bacteria and cysts; most chemicals, including VOCs; and pharmaceuticals.
2. Don't waste water like reverse osmosis systems.
3. Lower initial cost and lower operating costs.
4. Calcium, Potassium, Magnesium are not removed. Water tastes better, and provides some small amount of useful minerals to the body.

SBACD Water Treatment Equipments Disadvantage: 

1. Do not reduce levels of dissolved salts such as nitrates, fluoride, arsenic and cadmium. These contaminants are not usually a problem except in heavily agricultural areas with poor water treatment facilities, but if they are, a reverse osmosis system would be preferable.

Bottom Line Unless the substances in the preceding paragraph are an issue, activated carbon drinking water treatment systems seem preferable. They don't waste water, they're less expensive to operate, and they're simpler and less prone to maintenance/degradation issues.

Focus Engineerrs :

Focus Engineerrs - Leading Dosing-Metering Pump Manufacturer in Chennai, India.

Friday, 10 June 2016

Find the Best Chemical Dosing Metering Pumps System Manufacturer Chennai, India

Focus Engineerrs are premier chemical dosing and metering pump manufacturer in india. It provides leading chemical dosing metering system in porur, chennai. These dosing pumps are designed to move materials, acids, chemicals, coolants, hazardous fluid materials & lubricants. Our dosing pumps are inspected in terms of quality so as to dispatch a defect free range. These dosing pumps are appropriate for handling hazardous, toxic, abrasive, viscous, polluting and sensitive fluids in different industries.

Best Chemical Dosing System Manufacturer
Best Chemical Dosing System Manufacturer
Chemical Dosing System Features:

1. Impact resistance
2. Corrosion resistance
3. High strength

How to Buy Water Treatment Equipments Plant for Industry:

Water treatment equipments plant treat water from various sources like rivers and lakes. Water from these sources has to be purified to remove floating objects like sticks and other solids of larger dimensions, finer particulate matters, color, odor, pollutants and harmful bacteria and microbes.

Water Treatment Equipments Plant
Water Treatment Equipments Plant
Water will still contain some turbidity and other organics. An activated carbon filter is used to remove these impurities along with any remaining colored materials and odor-causing chemicals. Final polishing of this water is carried out by sand filters, and this water is taken to storage vessels. A small amount of chlorine can be used to treat this water to prevent bacterial contamination before the supply to the distribution system.

Thus, water from natural sources can be fully purified and disinfected and then stored in underground storage tanks.